Newbie Pipe Clamp Question - Sawmill Creek

Need some help - i'm new to woodworking. Just got a doze pipe clamps from HF (3/4" heavy duty pittsburgh), my first time using these. I know I should try to get black gas pipe, but I have two quick questions:

1) Is there a standard threading for this; that is, when I tell the guy i need 1 end threaded, is it standard or do I have to specify type of threading.

2) Can the clamps be changed out for different lengths of pipe or do most people lock them in (i.e. locktight). I guess I'd like to be able to have 3' & 6' pipes and switch them out on the clamps or will i need to dedicate a pipe to each clamp & affix them permanently.

Any help with this is appreciated. JASON (Littleton, CO)

Hey Jason

No problem with the threading, it is standard 3/4" NPT (there are others but they are not common). Also, you do not want to lock-tite the threads as you will remove the clamp ends to join pipes, etc. Simply screw them on. While your at it, get them to thread both ends of the pipe to give you you more options. A couple threaded couplers allows you to join pipes together to make longer clamps when needed. Protect the unused thread with the wire protection included with most (Pony) pipe clamp bodies.

Jason, the clamps have standared Pipe threads in them, and you just tighten the pipe into them snugly with a pipe wrench, NO Locktight is needed. If you would like to be able to use 3' and 6" length clamps, just put 3' lengths of pipe, (with both ends threaded), in ALL 12 of your clamps and then cut 12 additional 3' lengths and have them threaded on one end only. Buy 12 pipe collars and screw them onto the ends of the pipes that are installed in the clamps and tighten them with pipe wrenches. Now when you need to use a 6' clamp, just screw one of the spare 3' length pipes snugly into the pipe collar and you have a 6' clamp. This will be cheaper than having separate 3' and 6' lengths and give you a lot of versatility. If you don't think you will need 12 6' clamps at any one time, you might want to make some of the spare pipes 1', some 1 1/2' and some 2' long and these combinations would give you 4', 4 1/2' and 5' clamps.
Hope this answers your questions.


Oops, I had to stop to see about my wife in the middle of the post and see that Luciano answered your questions before I got back to it. Anyhow, welcome Jason, and have fun with your projects.

Jason - It goes something like this:

Get a half-dozen clamp sets, and a half-dozen pipes.

Then, get a few more pipes, because the first set worked fine, but was unwieldy for shorter lengths. Easy and cheap to do - the BORG guy will take a 10' length of black pipe, and be happy to cut it and thread it.

Then, those shorter lengths are a lot easier to use, but just....not....quite....long enough for the next glue-up, so get some more intermediate pipe lengths.

Then - get lazy/tired of changing the clamps from pipe-to-pipe, so get a few more clamp sets.

It ends [well, I'm sure it hasn't actually "ended" yet] with 24 clamp sets and 32 lengths of pipe. Every so often, someone offers a great deal on clamp sets in Classifieds, and you jump on that one right away - don't even stop to think because I might beat you to 'em, and then...........well, you get it.

I have Bessey + Gross Stabil parallel clamps, and all manner of F-style, and wood handscrew clamps, and use 'em all, but the pipe clamps are my "go to" for glue-up of panels. Just be sure to alternate them "one from above, then one from underneath" to keep the panel glue-up flat.

One word of waring. I went to HD yesterday to pick up some 4' lengths of pipe... They had no black pipe at all. No place for it or anything. Then I went to lowes a couple miles away. They only had pre cut and threaded lengths of pipe... fine for my purposes. I would suggest looking up a plumbing supply house or similar and give them your business so that you will have a place that stocks what you need in the future.


Can you tell I am tired of going to 2 different borgs to find something simple that I could have gotten at a real hardware store without issue?

Jason,

If you haven't heard or read this yet, make sure that you do not let black pipe lay against oak during a glue up. The moisture from glue from a joint can cause a nasty stain on your oak. Take some care to keep your pipe clamps off the wood and I would also suggest running a layer of painters tape on the "wood side" of the pipe just as added insurance. I've heard, but do not know for a fact, that galvanized pipe is not as bad about leaving the stain (but still will). Unfortunately, I do know for a fact that black pipe will stain.

Welcome to the Creek!
Brian

Pipe clips and clamps attach pipes to walls, ceilings and floors. Plastic, copper, stainless steel, brass, and chrome are just a few of the materials used to make them. Every material has advantages and disadvantages, so it’s vital to pick the best one for the task.

Goto Zhiang to know more.

• Carbon Steel

Carbon steel is the most popular material for pipe clamps. It is strong and durable, making it ideal for heavy-duty applications. However, it is also susceptible to corrosion, so choosing a clamp with a rust-resistant finish is important.

• Stainless Steel

Stainless steel is strong and durable, making it ideal for use in a pipe clamp. It is also resistant to rust and corrosion, which is important in an environment where pipes are constantly exposed to moisture.

• Aluminum

Aluminum is a popular metal for construction and manufacturing due to its strength, light weight, and resistance to corrosion. Aluminum is also a heat and electricity conductor, making it suitable for use in a variety of applications. For these reasons, aluminum is an excellent choice for pipe clamps and other industrial applications.

• Plastic

You need a material that is easy to work with and won’t damage your pipes. That’s why plastic is the perfect material for pipe clamps.

Plastic is strong enough to handle even the most strenuous jobs but is also lightweight and easy to maneuver.

Plus, plastic is non-conductive, so that it won’t cause any damage to your pipes.

• Copper

Copper is strong and durable yet flexible enough to allow a tight fit. It is also resistant to corrosion and won’t tarnish over time.

In addition, copper is an excellent conductor of heat, making it ideal for use in hot water lines. For these reasons, copper is the material of choice for many plumbing applications.

• Brass

Brass is a good choice for high-pressure applications because it is both strong and long-lasting. It’s also resistant to corrosion, which is vital if you work in an environment with dampness or chemicals.

• Alloy Steel

Alloy steel is ideal for heavy-duty applications because it’s strong and durable. It’s also resistant to corrosion and works well in damp or wet environments.

However, alloy steel is also susceptible to damage from impact, so it is important to choose a clamp designed to withstand the forces that will be applied to it. An alloy steel pipe clamp can provide years of reliable service with proper care.

• Chrome/Chrome-Plated pipe clamps, etc

The chrome and chrome-plated are very durable and resistant to corrosion. They also have a very high shine, giving your project a professional look. However, they can be components, so if you’re working on a budget, you may want to consider other options.

uPVC waste pipe clips are usually a good option for connecting waste pipes from various high-throughput household or commercial equipment, particularly when an excessively long run to outside drainage makes the 40mm diameter conduit a less suitable choice than usual. These installations will most frequently be constructed of uPVC or similar plastics.

Deciding Size of Pipe Clamps

The size of a pipe clamp is determined by:

• Pipe outside diameter

The outer diameter of metallic pipes is fixed, so clamps are chosen based on the pipe’s OD. Plastic pipes may differ from manufacturer to manufacturer, influencing the selection of piping clamps.

• Special Consideration

It’s possible to use clamps on pipe insulation in some situations safely, but when doing so, you must consider the thickness of the insulation.

How to Use Metal Pipe Clamps

Pipe clamps come in various designs, but they’re commonly used to connect pipes. You can connect two pipes using pipe clamps in several ways. There are many ways to use pipe clamps to help strengthen your pipes. Here are some examples:

Metal Clamps as Hangers

It’s key to hang pipes from above when working with them so they are out of the way and you can easily access them. Metal clamps do this perfectly.

You can easily and securely hang your pipes from any overhead structure by pairing your clamps with hangers. This is an excellent method for keeping your workspace clean and organized. Plus, it helps you avoid potential accidents. So next time you work with pipes, make sure to use metal clamps to keep them safely out of the way.

Metal Clamps as Elevators

Another popular use is to lift pipes up with them. When you combine clamps with pipe shoes, you may lift pipes off the ground or other surfaces. This is a simple method to raise and safeguard horizontal pipe runs.

This can be especially helpful in preventing damage to pipes buried underground or otherwise difficult to access. In addition, using clamps as elevators can make it easier to install new pipes or repair existing ones. So next time you need to elevate a pipe, don’t forget the power of metal clamps.

Metal Clamps as Vertical or Horizontal Supports

Metal clamps provide a fundamental level of support for your pipes, ensuring they remain securely in place. Whether your pipes are arranged in a vertical or horizontal configuration, metal clamps can be attached to surrounding support structures to provide the stability your pipes need.

Are you interested in learning more about high strength pipe holding clamp? Contact us today to secure an expert consultation!

In addition to helping prevent accidental damage, metal clamps make it easier to install and remove pipes for maintenance or repair.

Pipes require proper support, so pipe hangers are key to any pipe-related installation. When it comes time to select metal clamps for your project, be sure to choose a reputable brand – Clampia, that offers a variety of sizes and styles to suit your needs. With the right metal clamp, you can rest assured that your pipes will remain securely in place.

What Benefits Do Metal Pipe Clamps Bring to Your Pipe System?

How can metal pipe clamps help your piping system endure the test of time? They offer a variety of services, including protection and improvement. Here are some prevalent benefits of pipe clamps:

• Elevate Pipes

Having your pipes elevated by using metal pipe clamps can help you avoid having disasters in the first place. Water expands and puts pressure on a pipe when it freezes inside it. The pressure is too much for some pipes to handle, which is why they burst.

When pipes are resting on a hard surface and are clamped down, it takes away the chance of the pipes being able to move and rub against the surface. Another way to avoid water from leaking out of gaps is to fill the cracks with epoxy resin or putty, as well.

In addition, using metal pipe clamps can help to reduce the noise that often comes from banging pipes. Banging pipes are typically caused when the water pressure changes or when water flow is shut off quickly. When you use these clamps, you can eliminate this issue.

This is a must-do maintenance task. It not only helps your plumbing system function more efficiently, but it also gives you piece of mind knowing that it’s been properly maintained.

• Suspend Pipes

Any good pipe system needs support. Metal pipe clamps provide that support in various ways, depending on the design of the clamp. Some clamps function as beam clamps, resting on an I-beam or other structural element to support the weight of the pipes.

Other clamps, known as pipe saddles, fit around the circumference of the pipes and bolt to a support surface. This is ideal for attaching pipes to walls or ceilings.

Finally, some pipe clamps function as roller supports. Not only do these support the weight of the pipe, but they also allow it to roll freely; making them ideal for mobile applications such as construction site trailers. No matter your needs, a metal pipe clamp can provide the right level of support.

• Protect Pipes from the Elements

Pipe clamps provide that extra protection your pipes need in harsh outdoor environments. They keep your pipes secure and prevent them from contacting corrosive liquids or grime.

They also protect your pipes from inclement weather, ensuring they won’t come crashing down in strong winds or heavy rains.

In short, pipe clamps are an essential part of any pipe system that is exposed to the elements. By investing in quality pipe clamps, you can extend the life of your pipes and protect your investment.

• Cut Down Vibration Damage

Metal pipe clamps improve your pipe system by reducing vibration damage. Unanchored pipes can be banged against other objects, wearing down the pipe. Metal clamps help to reduce this by holding the pipe in place.

By absorbing and dissipating the energy of the vibrations, metal pipe clamps can extend the life of your pipes and prevent costly repairs. In addition, metal pipe clamps can also reduce noise levels, making your piping system more efficient and effective. As a result, metal pipe clamps are an essential part of any high-performance piping system.

How to Install Metal Pipe Clamps

Before using your new metal pipe clamp, ensure it is installed correctly. Pipes that are not properly supported can break and cause extensive damage. Here are a few things to keep in mind when installing your clamp:

Pay attention to the metals you’re using.

It’s critical to pay attention to the metals you’re employing before you begin utilizing your metal pipe clamps. Not all metals get along well. Galvanic corrosion can occur if the metal in your pipe clamps isn’t suitable with your pipes.

That’s why it’s important to consult a Pipe Clamp Compatibility Chart before you start your project.

Double-check your support spacing.

Before beginning your project, be sure to take some time to double-check the support spacing. This will ensure that your pipe clamps are properly spaced out and avoid any potential problems down the line. If your clamps aren’t properly spaced, it can cause the pipes to sag in between them.

This can then lead to corrosive pooling or put extra pressure on runs of pipe which can cause serious damage. By taking the time to do this simple check, you can save yourself a lot of hassle and potential headaches.

Tighten clamps with care.

Pipe clamps are secured with nuts and bolts, and they should be handled with care. If you tighten them too much, you risk stripping the bolts, and if you don’t tighten them enough, pipes may hit your clamps and cause damage.

To avoid this, always use a torque wrench when tightening clamps. When correctly installed, metal pipe clamps will provide a secure and reliable hold on your pipes, making them an essential part of any plumbing job.

If you are looking for more details, kindly visit cryogenic pipe supports leading manufacturer.