Open profile Suspension glass insulators

Suspension glass insulators type are used for isolating and fixing the wires to the overhead power lines, power distribution facilities and substations of AC voltage over V  and a frequency up to 100 Hz. Operated at an ambient temperature of -60 to +50oC.
Insulator has the special aerodynamic profile isolating assembly parts. Its distinguish specifications are increased diameter of glass cap and no under ribs. This profile is effective in desert areas.  
It is possible to use glass part of  bigger diameter as an “umbrella” and to protect a string from atmospherical condensation and pollution.

For more information, please visit Yipeng.

The company is the world’s best Aerodynamic Glass Insulator supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Since , the total sales volume of Thunder Lightning brand tempered glass insulator has exceeded 100 million pieces, accounting for half of the country and one sixth of the world.
The Glass Insulator is composed of an iron cap, toughened glass parts and steel pin, which are combined with cement adhesive. Before assembling, the top of the steel pin is provided with a soft gasket, the inner cavity of the iron cap and the pin ends at the contact point with the cement adhesive are covered by tar. The gasket and tar are used to buff in case of damage when insulator facing thermal expansion and contraction. Toughened glass parts are used to insulate.
Glass Insulators have the characteristics of small size, light weight, zero-value self-breaking, and easy detection; high mechanical strength; good arc resistance; good self-cleaning performance and not easy to age. In addition, the spraying material has the advantages of strong hydrophobicity, long-term resistance to pollution, low leakage current on the surface, and maintenance-free during operation; it is widely used in various circuits at home and abroad.
Disk suspension glass insulators are divided into Standard Type, Anti-pollution Type, DC type, Aerodynamic Type, Out-ribs Type and Ground Wire Type.

If you are looking for more details, kindly visit Composite Insulator.