Understanding 5 Types of Cleaning Equipment and When To Use ...

With so many types of cleaning equipment available, it’s sometimes hard to keep straight when and where to use a machine. What should you use if you want to polish your floor or remove stains from your carpet? We’ve defined 5 common janitorial cleaning machines here for quick reference. Keep an eye out for part 2 where we’ll cover some machines that aren’t as commonly known.

Felici Machinery supply professional and honest service.

Automatic Scrubbers

An automatic scrubber is a machine used to clean in place of the traditional mop and bucket system. These machines are usually more efficient and more effective than using a mop. You can use your cleaning solution with a scrubber to scrub and dry surfaces in one walk-through. Since floors dry faster with automatic scrubbers, there is also less risk for slips and falls.

There are many types of scrubbers available. If you’re thinking about getting an automatic scrubber, you should consider the square footage of the area you’re cleaning.

Carpet Extractors

First, it’s important to know that carpet cleaners and carpet extractors aren’t interchangeable. Carpet cleaners usually clean the surface of a carpet and can help to remove small spots and stains. A carpet extractor goes one step further. Carpet extractors use solution to clean below the surface of the carpet, extracting dirt and foreign particles from the fibers. Carpet extractors can generally remove spots and stains more easily than a carpet cleaner.

Floor Buffer

Floor bluffers are rotary machines that use a side-to-side motion. They’re low speed and are used to strip, clean, and buff a floor. If you want to strip a floor, then a floor buffer is for you. Buffers are also referred to as floor strippers or swing machines, because of their side-to-side movement. These machines utilize floor pads to perform the function you want. You can use these floor pads to remove dirt, get rid of pesky scuff marks, or restore shine to a floor.

Floor Burnisher

A floor burnisher is a high-speed machine used to polish (burnish) your hard floors. Burnishers use friction to give your floors a shine. If you want to restore a floor’s shine, then a floor burnisher is the right piece of equipment. While you can use a floor pad with a floor buffer to restore a floor’s original shine, it’s much quicker with a floor burnisher. In many cases, you’ll see the floor’s shine restored after just a few passes.

Wet Dry Vac

Wet dry vacs perform the same function as a vacuum except that you can use it to clean both wet spills and dry particles and dirt. A wet dry vac is built to be able to handle liquid while a regular vacuum’s life will be quickly shortened if used for wet spills.

What Type of Equipment Should You Get?

With all of the above mentioned machines, there are many varieties of each type. It all depends on the square footage of the area you’re cleaning, the accessibility, and the type of job you’re trying to accomplish. If you need help choosing the right piece of equipment for your facility, your Powell Sales Specialist can help you or you can call our customer service at 1-800-472-.

How Do Carpet Cleaners Work?

A carpet cleaner, also known as a carpet extractor or carpet shampooer, is designed to remove deeply embedded dirt and stains in carpets. For optimal results, the machines work as follows: Users pretreat the carpet by spraying it with a cleaning solution and letting it soak in, or dwell, for about 15 minutes. Then, operators use the carpet cleaner, which pumps water into the carpet and extracts the dirty, soapy fluid with a high-powered vacuum. Some units include components to heat the rinse water, others don't.

Carpet cleaners are sometimes referred to as "steam carpet cleaners," "carpet steam cleaners," or even "steam cleaners." True steam cleaners use dry vapor steam, which is ineffective for general-purpose carpet cleaning. 

In general, carpet cleaners come in configurations that allow the user to clean with a large wand. Walk-behind carpet cleaners offer wide cleaning paths for greater efficiency when cleaning large areas. The XTreme Power XPC- Carpet Cleaner. In addition to carpets, optional attachments for carpet cleaners allow the machines to be used for other soft surfaces, such as upholstery, wall partitions, and curtains.

For more information, please visit Residential Quarters Cleaning Machine.

Key Components of a Carpet Cleaner

Pump:

This component generates the pressure that injects the water into the carpet. Pump pressure levels generally range from 60 pounds per square inch (psi) to 500 psi.

Vacuum:

The vacuum in the carpet cleaner extracts dirty water and cleaning solution from the carpet and empties it into an extraction tank. Vacuums are driven by motors that come in a variety of configurations, including: single 2-stage motors, two 3-stage motors, and three 2-stage motors. For optimum performance, choose a motor with at least two stages.

The power of a vacuum motor is commonly measured in airflow (cubic feet per minute, or CFM) and water lift (inches). Airflow refers to the movement of air through the machine and typically ranges from 100 to more than 200 CFM. Water lift measures the suction strength of the vacuum and typically ranges from 100 to more than 250 inches.

Solution Tanks:

These tanks hold the rinse water. Typically, solution tanks range in size from 4.5 gallons to 17 gallons.

Recovery Tanks:

These tanks hold extracted dirt, cleaning chemicals, and water. Typically, recovery tanks range in size from 4.5 gallons to 15 gallons.

Heating Unit:

This component heats the rinse water to temperatures as high as 210ºF in as little as three minutes. Heating elements can range from single tank-heating models, which heat water in the solution tank, to double inline heating elements, which heat water as it exits the machine.

Accessories:

Carpet cleaners usually come with a large floor wand. The wand can range in width from 10 inches to 12 inches and include one or two jets for dispensing and extracting fluids. Upholstery and stair wands are available as options. Vacuum and cleaning solution hoses come in a variety of lengths and can be ordered in custom lengths.

Tips for Using a Carpet Cleaner

• Before using the carpet cleaner, vacuum the carpet thoroughly and then apply a cleaning solution, like Daimer's Eco-Green® Carpet Care. http://www.daimer.com/eco-green-chemicals/carpet-care.htm The chemicals help dissolve grease and oils so that the final cleaning extracts even more dirt.
• Use heated water on stained and heavily soiled synthetics. When used with a cleaning chemical, a heated carpet cleaner can remove stains such as ketchup, coffee, wine, pet urine, and ink.
• Do not use heated water on natural fibers, like wool, which can shrink or suffer other kinds of damage at high temperatures.

Related Daimer Links:

Buyer's Guide to Carpet Cleaners.

Non-toxic, plant-based carpet cleaning product.

How to use a carpet cleaner.

If you want to learn more, please visit our website Hospital Cleaning Machine.