What Are the Advantages of s type skeleton oil seal？

What is a skeleton oil seal?

The skeleton oil seal is a typical representative of oil seals, usually referred to as the oil seal refers to the skeleton oil seal. The skeleton oil seal is a sealing device that closes the lubrication or liquid grease on the rotary shaft. The function of the oil seal is to isolate the parts that need lubrication in the transmission parts from the output parts to prevent the lubricant from leaking.

If you are looking for more details, kindly visit Dingtong.

The skeleton oil seal usually consists of the outer ring, inner ring, sealing lip, metal skeleton spring and other parts, and the sealing body is divided into the bottom, waist skeleton oil seal construction diagram, edge and sealing lip according to different positions.

Sealing principle of skeleton oil seal

Due to an oil film controlled by the oil seal edge between the oil seal and the shaft, this oil film has the characteristic of fluid lubrication.
Under the action of the skeleton oil seal, the stiffness of the oil film is just enough to make the oil film and air contact end to form a crescent surface, preventing the leakage of the working medium to realize the sealing of the rotary shaft. The sealing ability of the oil seal mainly depends on the thickness of the oil film on the sealing surface. If the thickness is too large, the oil seal leaks; if the thickness is too small, dry friction may occur, causing wear of the oil seal and the shaft; if there is no oil film between the sealing lip and the shaft, it is easy to cause heat and wear.

Type of skeleton oil seal

Various types of skeleton oil seals are suitable for different occasions, applications and working environments. The following are mainly categorized into four types:

Single-lip Simmerring Oil Seal

Single Lip Simmerring Oil Seal has a relatively simple structure and low cost. It is mainly used to prevent oil leakage with a single sealing lip, usually used in low-speed and low-pressure application scenarios. Single lip skeleton oil seal is one of the most widely used skeleton oil seals, and its advantages are that it is easy to install, occupies little space, and has good dust and oil sealing. Based on the basic form, there are also various types, such as coil spring type, deformation spring type and compression spring type;

Double-lip Simmerring Oil Seal

Double Lip Simmerring has two sealing lips, providing better sealing performance and effectively preventing impurities such as liquid and dust from entering mechanical equipment. It suits some demanding working environments, such as high speed and pressure. Double-lip Simmerring has more sealing performance than single-lip Simmerring, but due to the particular structure form, it will occupy more space. The advantage of double-lip Simmering is better dust and oil resistance, more suitable for use in long-term operation and dusty environments;

V Type Simmerring Oil Seal

A V-shaped skeleton oil seal is also known as an “oblique mouth oil seal.” Its oil sealing performance is good and especially suitable for use in high-speed shaft rotation. The V-shaped structure prevents dust, water and other impurities from entering and also dramatically reduces seal damage and noise;

X Type Simmerring Oil Seal

An X-type skeleton oil seal is also an oil sealing solution. Its structure uses a multi-layer structure nested together, effectively solving the problem of single-lip and double-lip skeleton oil seals that are easy to slip off under specific conditions. The skeleton oil seal has excellent sealing and wear-resistant performance and is suitable for long-term machinery and equipment operation.

There are many types of Simmerring oil seals, and these different types of Simmerring oil seals are suitable for various mechanical sealing needs according to their structure and application environments. To ensure mechanical equipment’s long and efficient operation, the correct selection and use of Simmerring oil seals is particularly important. For special applications, such as the food industry, medical equipment, etc., there may be special-purpose customized oil seals whose materials and design must comply with the relevant standards and regulations.

Skeleton oil seals, also known as radial shaft seals or lip seals, are crucial components used to prevent leakage of lubricants and protect mechanical systems from contaminants like dust, dirt, and moisture. These seals are widely used in industries like automotive, machinery, and manufacturing, and choosing the right oil seal is essential for optimal performance and longevity. Here's a detailed guide to help you choose the correct skeleton oil seal for your specific application.

1. Understand the Application Requirements

The first step in choosing a skeleton oil seal is to fully understand the specific application for which it will be used. Factors like operational speed, temperature, pressure, and the type of fluid being sealed are important considerations.

- Operating Conditions: Determine the environment in which the oil seal will operate. Consider exposure to extreme temperatures, the presence of chemicals, and whether it will be used indoors or outdoors.

- Fluid Type: Identify the type of fluid the seal will be in contact with. This could include oils, grease, or other types of lubricants. Ensure the seal material is compatible with the fluid.

- Pressure and Speed: Know the maximum operating pressure and rotational speed of the shaft. Some seals are designed to handle high-pressure environments, while others are suitable for low-pressure applications.

Rubber Skeleton Oil Seal

2. Select the Right Seal Material

Skeleton oil seals are available in various materials, each with specific properties that make them suitable for different applications. The choice of material is critical as it affects the seal's resistance to heat, chemicals, and wear.

- Nitrile Rubber (NBR): The most common material for oil seals, NBR offers excellent resistance to oil and abrasion. It is suitable for temperatures ranging from -40°C to +120°C and is ideal for general-purpose sealing in industrial and automotive applications.

- Fluorocarbon (Viton): Viton seals offer higher resistance to heat and chemicals, making them suitable for high-temperature applications (up to 200°C). They are also resistant to a broader range of chemicals and are ideal for use in environments with aggressive fluids.

- Silicone Rubber: Silicone seals offer good flexibility at both high and low temperatures, but they are not as resistant to oil as NBR or Viton. Silicone is often used in applications where temperature resistance is more important than oil resistance.

- Polyurethane (PU): Known for its exceptional wear and abrasion resistance, polyurethane is often used in applications where the seal is exposed to high levels of friction and stress.

- PTFE (Teflon): PTFE oil seals offer excellent chemical resistance and operate well in a wide temperature range. They are commonly used in applications involving aggressive fluids or extremely high temperatures.

Rubber Skeleton Oil Seal

3. Choose the Right Lip Design

The lip design of the oil seal plays a crucial role in how well it prevents leakage and withstands pressure. Skeleton oil seals are available in different lip designs to suit varying applications.

- Single Lip (SL): Single-lip oil seals are designed to prevent leakage from the inside of the system. These are commonly used in general sealing applications where there is low pressure and no external contaminants.

- Double Lip (DL): Double-lip oil seals have an additional lip that provides extra protection against external contaminants like dust and dirt. These seals are ideal for outdoor applications or where the system is exposed to debris.

The company is the world’s best s type skeleton oil seal supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Additional reading:
The Ultimate Guide to Choosing Indux Slurry Pump

- Triple Lip (TL): These seals are used in heavy-duty applications where both high pressure and exposure to contaminants are concerns. The additional lips provide a more secure seal and extended durability.

4. Consider Seal Dimensions

Getting the correct size is essential to ensure a proper fit and effective sealing. Skeleton oil seals are typically specified by their inner diameter (ID), outer diameter (OD), and thickness or width.

- Inner Diameter (ID): This is the diameter of the shaft on which the seal will be installed. Measure the shaft accurately to avoid leakage or seal damage.

- Outer Diameter (OD): This is the diameter of the bore or housing where the seal will be installed. The outer diameter should be slightly larger than the bore to create a tight fit.

- Width: The width of the oil seal should match the depth of the groove or housing where it will be seated. An incorrect width can lead to misalignment and inadequate sealing.

It's important to follow the manufacturer’s specifications for the proper size. Using calipers or other precise measuring tools can help ensure an accurate fit.

Rubber Skeleton Oil Seal

5. Check for Operating Temperature Range

The temperature range that the oil seal will be exposed to is another key factor. If the temperature exceeds the seal's capacity, it can lead to degradation, hardening, or softening of the seal material, leading to premature failure.

- Low Temperatures: For cold environments, choose materials like silicone that remain flexible even at low temperatures. NBR seals can handle cold temperatures but are not as effective in extreme cold.

- High Temperatures: For high-temperature applications, consider materials like Viton or PTFE that can withstand heat without losing their sealing properties.

Always ensure the material and design you select are capable of operating at the upper and lower limits of your application’s temperature range.

6. Verify Pressure Handling Capability

While most skeleton oil seals are designed for low-pressure applications, some seals are specifically designed to handle moderate to high pressure. If your application involves significant pressure levels, be sure to choose an oil seal that can withstand the force without failing.

- Low-Pressure Seals: For most general-purpose applications, standard skeleton oil seals can handle low pressures effectively.

- High-Pressure Seals: For higher-pressure environments, choose seals with reinforced lips or specialized designs that can handle the extra force.

7. Review Shaft Surface and Speed

The condition and speed of the shaft on which the oil seal will be mounted directly impact the seal’s performance. A worn or rough shaft surface can quickly damage the seal, leading to leakage.

- Shaft Surface: Ensure the shaft surface is smooth and free from grooves, scratches, or other imperfections that can compromise the seal. A polished shaft is ideal for maximizing the lifespan of the oil seal.

- Rotational Speed: Oil seals are designed to handle certain speeds. High-speed shafts require seals that can withstand the friction generated by rapid rotations without overheating or wearing out quickly.

8. Evaluate Dust and Contaminant Exposure

If your application is exposed to harsh environmental conditions, dust, or debris, consider using double-lip or triple-lip skeleton oil seals. The extra lips provide additional protection, preventing contaminants from entering the system and compromising the lubrication.

For heavy-duty applications, seals with dust flingers or wipers may also be an option to keep contaminants at bay.

9. Look for Additional Features

Some skeleton oil seals come with extra features designed to enhance performance and durability, especially in demanding applications. These include:

- Spring-Loaded Seals: Some seals feature a spring that helps maintain a tight fit around the shaft, ensuring consistent pressure and preventing leaks, even as the seal wears down over time.

- Labyrinth Seals: These seals have a unique design that provides extra resistance to contaminants, making them ideal for applications involving extreme dirt or dust exposure.

10. Consider the Cost and Availability

Finally, when choosing a skeleton oil seal, consider both the cost and the availability of spare parts. While it’s important not to compromise on quality, balance your budget with the specific needs of your application. Additionally, ensure that replacement seals are readily available for maintenance purposes.

Conclusion

Choosing the right skeleton oil seal involves understanding your application’s specific requirements, including the environment, shaft speed, pressure, and type of fluid being sealed. Consider the material, lip design, and seal size carefully, and ensure that the seal you select is suitable for the operating conditions. A high-quality, well-chosen skeleton oil seal will ensure efficient operation, extend the lifespan of your machinery, and reduce downtime due to leaks or failures.

Find premium O-rings in all sizes and materials. Perfect for industrial sealing. High-quality Seals for various industries.

Contact us to discuss your requirements of pu dynamic seal. Our experienced sales team can help you identify the options that best suit your needs.